Skip to Main Content
Canadian
Canadian owned and operated

907614 - Millermatic 211 W/Mvp Miller Mig Weld pack 120/240 Volt

A Rebate Is Available

Miller: Build With Blue

Packaging: 1 per each
$3,107.91/ea $2,755.00/1 per each only $2,755.00/eaSave 11%

In stock

OVERVIEW

Miller® Millermatic® 211 MIG Welder

Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.

Advanced Auto-Set™: Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile. Inverter Technology: Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds. Quick Select™ Drive Roll: Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire. Auto Spool Gun Detect™: Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch. Multi-voltage plug (MVP™): Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord. New Drive System: Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. Smooth-Start™: Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. Generator Compatible: The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators. Fan-On-Demand™: Cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Additional Information
Packaging Description:1 per each
Weld Process:MIG
Brand:Miller
Voltage:120/230
Amps:230
Duty Cycle:40
Watts:n/a
Cutting Capacity:n/a

INCLUDED

  • 10 ft (3 m) MDX™-100 MIG gun
  • 10 ft (3 m) work cable and clamp
  • 6.5 ft (2 m) power cord and MVP™ adapter plugs for 120V and 240V
  • Argon and AR/CO2 mix regulator/flow gauge with hose
  • Hook-and-loop cord wraps
  • Material thickness gauge #229895
  • Millermatic 211
  • Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
  • Spool of Hobart® .030 in (0.8 mm) solid wire
  • Two contact tips for .030 in (0.8 mm) wire

APPLICATIONS

  • WeldingProjects

CATALOGUE & SPEC SHEETS

Miller Catalog
Spec Sheet