07T504 - Walter Quick-Step 5-Inch High Polish Mirror Finish Disc

Name: Walter Quick-Step 5-Inch High Polish Mirror Finish Disc
Brand: Welders Helper
SKU: 07T504
Price: 114.80 CAD
Availability: InStock

Packaging: 10 per each

$18.00/ea $114.80/10 per each only $11.48/eaSave 36%

Save an additional $5.74 at checkout

Join the Nation of Welders Program

SKU: 07T504 Categories: Abrasives, Sand and Blend Discs

OVERVIEW

Get a Show-Quality Shine with the Walter High Polish Disc

When your customer demands a mirror finish that you can see your reflection in, the Walter 07T504 Quick-Step High Polish Disc is the tool you grab. Forget about struggling with messy, loose buffing wheels that grab the workpiece; this 5-inch disc attaches right to your grinder or sander using a simple hook-and-loop system. It’s designed to take your metal fabrication projects from "good enough" to "show quality" with minimal effort. Whether you are polishing up custom stainless steel handrails, aluminum truck tanks, or decorative architectural pieces, this disc helps you get that deep, chrome-like shine.

The beauty of the Quick-Step system is the speed. You can switch from a blending disc to this polishing disc in seconds. Just peel off the old one and slap this one on. It holds polishing compounds really well, meaning you aren't wasting paste flinging it all over the shop floor. It’s built tough to handle the rigors of a welding shop but soft enough to gently buff out those final haze marks without gouging the metal. It works on everything from standard steel to delicate aluminum and hard stainless steel.

Using the 07T504 is the secret to upgrading a standard finish to a mirror finish. It’s perfect for removing those tiny micro-scratches left behind by fine sanding discs. Just load it up with some polishing paste, keep the grinder moving, and watch the metal pop. It’s an essential accessory for any welder or fabricator who takes pride in the final look of their work. Don't let a dull finish ruin a perfect weld—shine it up with Walter.

Shop Tips for Best Results

Prep Work Matters: Don't skip steps. Sand down to at least a very fine grit (like 600 or 800) before switching to this polishing disc.
Use Paste: This disc is designed to be used with a polishing compound or paste. It won't do much dry.
Keep it Clean: Store your polishing discs in a bag to keep grinding dust off them. A dirty polishing pad will just scratch your work.

Additional Information
Brand:Walter Surface Technologies
Diameter:5
Used To Sand:Steel, Stainless Steel, Aluminum
System:Quick-Step
Application Type:Mirror Finishing, Polishing
Mounting Type:Hook and Loop
Packaging Description:10 per each

INCLUDED

1 x 5" Quick-Step High Polish Disc

APPLICATIONS

Creating mirror finishes on stainless steel surfaces
Polishing aluminum tanks and automotive parts
Restoring shine to architectural metalwork
Upgrading #4 sanitary finishes to high-gloss
Final buffing of decorative steel elements
Removing minor surface haze and micro-scratches

FAQ

Yes, the High Polish Disc is designed to be used as a carrier for polishing pastes or compounds to achieve a mirror finish.

This disc requires a Walter Quick-Step backing pad (hook and loop) compatible with 5-inch discs.

No, this disc is for final polishing. Deep scratches should be removed with coarser sanding discs before using this product.

It is suitable for use on stainless steel, steel, and aluminum.

Yes, the disc can be reused multiple times until the material is worn down or becomes too loaded with contaminants.

Always refer to the label on the disc or the backing pad for the specific maximum RPM, but generally, polishing is done at lower speeds (typically 2,000 to 4,000 RPM) to prevent overheating.

The disc itself has the loop backing (velcro-style) on it, but you need to buy the backing pad for your grinder separately.

Yes, provided you have the correct Quick-Step backing pad and ideally a variable speed grinder, as full-speed grinding (10,000+ RPM) is often too fast for effective polishing.